Vinidex manufactures and supplies a comprehensive range of product systems to suit a range of applications.
Vinidex offers world class piping systems and solutions. Focusing on global reach with national support Vinidex provides solutions to the following markets & applications.
Water supply services
Above ground water supply
Below ground drainage and sewer
Watermains
Irrigation
PVC-U pipes are totally unaffected by soil and water chemicals and will not be affected by anything that can normally be found in sewage effluent.
PVC-U pipe is light weight for ease of handling and installation.
PVC-U RRJ pipes are available in Series 1 or Series 2 outside diameters.
PVC-U pipes will not affect the taste, smell, appearance or health aspects of drinking water.
| Series 1: DN 50 – DN 375 Series 2: DN 50 – DN 400 For availability of the full range of Series 1 pipe, fittings and Series 2 pipe, please contact Vinidex customer service. |
| Series 1: PN 4.5 – PN 12 Series 2: PN 12, PN 16, PN 18 and PN 20 |
| Above ground and buried applications |
| Typically 0° to 50°C, lower temperatures with special consideration, re-rating for temperatures > 20°C. For more information please view Temperature Considerations. |
| PVC-U Material Properties |
| Outdoor PVC pressure pipes can be painted with an acrylic-based paint for additional protection against solar radiation. |
| Chemical Resistance |
| For information on PVC-U pressure loads, please view PVC Pressure Considerations. |
Best Environmental Practice
Green Star
Vinidex PVC-U pressure pipes and fittings are manufactured from BEP PVC and have an EPD registered with the Australasian EPD Programme. This allows constructors to claim credit points under the Green Building Council of Australia’s (GBCA) Green Star ratings tools and the Infrastructure Sustainability Council of Australia’s (ISCA) Infrastructure Sustainability rating scheme
Environmental Product Declaration
Safety Data Sheets (SDS)
Click here to access our Safety Data Sheets page.
Standards for PVC-U pressure pipe
Polydex® Series 1 pipes and Vinyl Iron® Series 2 pipes are manufactured in accordance with AS/NZS 1477 – PVC pipes and fittings for pressure applications.
Standards for rubber rings
Rubber rings for jointing Polydex® and Vinyl Iron® pipes are manufactured in accordance with AS 1646 – Elastomeric seals for waterworks purposes. Assembled rubber ring joints are also subjected to a variety of internal and external pressure testing to verify the joint design and long term performance.
Contact with drinking water
PVC-U pipes comply with the requirements of AS/NZS 4020 – Testing of products for use in contact with drinking water. This Standard specifies a series of type tests, which are carried out in order to demonstrate that the product does not have a detrimental effect on the quality of drinking water. It assesses the effect of the pipe on the taste, odour and appearance of water as well as the health aspects due to growth of microorganisms and leaching of toxic substances.
StandardsMark
Watermark
PVC SCJ Pressure and Non-Pressure Jointing Video
Quick Reference Installation Guide
Standards
Vinidex recommends that PVC-U pressure pipes are installed in accordance with AS 2032 – Installation of PVC pipe systems. For further information on PVC Pressure installation please refer to our PVC Pressure Pipe Technical Resources.
| Series 1: DN 50 – DN 375 Series 2: DN 50 – DN 400 For availability of the full range of Series 1 pipe, fittings and Series 2 pipe, please contact Vinidex customer service. |
| Series 1: PN 4.5 – PN 12 Series 2: PN 12, PN 16, PN 18 and PN 20 |
| Above ground and buried applications |
| Typically 0° to 50°C, lower temperatures with special consideration, re-rating for temperatures > 20°C. For more information please view Temperature Considerations. |
| PVC-U Material Properties |
| Outdoor PVC pressure pipes can be painted with an acrylic-based paint for additional protection against solar radiation. |
| Chemical Resistance |
| For information on PVC-U pressure loads, please view PVC Pressure Considerations. |
Best Environmental Practice
Green Star
Vinidex PVC-U pressure pipes and fittings are manufactured from BEP PVC and have an EPD registered with the Australasian EPD Programme. This allows constructors to claim credit points under the Green Building Council of Australia’s (GBCA) Green Star ratings tools and the Infrastructure Sustainability Council of Australia’s (ISCA) Infrastructure Sustainability rating scheme
Environmental Product Declaration
Safety Data Sheets (SDS)
Click here to access our Safety Data Sheets page.
Standards for PVC-U pressure pipe
Polydex® Series 1 pipes and Vinyl Iron® Series 2 pipes are manufactured in accordance with AS/NZS 1477 – PVC pipes and fittings for pressure applications.
Standards for rubber rings
Rubber rings for jointing Polydex® and Vinyl Iron® pipes are manufactured in accordance with AS 1646 – Elastomeric seals for waterworks purposes. Assembled rubber ring joints are also subjected to a variety of internal and external pressure testing to verify the joint design and long term performance.
Contact with drinking water
PVC-U pipes comply with the requirements of AS/NZS 4020 – Testing of products for use in contact with drinking water. This Standard specifies a series of type tests, which are carried out in order to demonstrate that the product does not have a detrimental effect on the quality of drinking water. It assesses the effect of the pipe on the taste, odour and appearance of water as well as the health aspects due to growth of microorganisms and leaching of toxic substances.
StandardsMark
Watermark
PVC SCJ Pressure and Non-Pressure Jointing Video
Quick Reference Installation Guide
Standards
Vinidex recommends that PVC-U pressure pipes are installed in accordance with AS 2032 – Installation of PVC pipe systems. For further information on PVC Pressure installation please refer to our PVC Pressure Pipe Technical Resources.
Need some help? View our Product Support area for downloads, installations and jointing procedures.
